nokka-logo-vino

 
finland sweden germany austria

Energy wood grapples

Cutting – Felling – Loading

Nokka EK 200 Energy Wood Grapple is used for small timber felling, bundle and loading. EK 200 is installed in place of a timber grapple. Switching into ordinary timber grapple happens easily and quickly thanks to the detachable cutting unit.

The Nokka EK 200C makes also the collecting of the wood.  It can be installed in place of a timber grapple. EK 200C comes with a control cable and push button unit (2 buttons: up/down), so that the grapple can be controlled directly from the tractor’s cabin. The grapple can also be used as an ordinary timber grapple, by detaching the cutting unit and turning the head into the felling position.

Specifications of EK200

  • Max. cutting diameter 20 cm
  • Height at cutting position 72 cm
  • Height without cutting unit 57 cm
  • Max. opening 72 cm
  • Weight 190 kg
  • Propulsion of cutting cylinder (175 bar) 11 kN
  • Hydraulic tilt as standard
  • Bolt attached cutting blade Wear Plate 500
  • Min. hydraulic flow 40 l/min
  • Pressure 175 bars
  • No need for additional hydraulics.
  • Coupling into grapples hoses.
  • Detachable cutting unit.
  • 2 sequence valves.

Specifications of EK200C

  • Max. cutting diameter 20 cm
  • Height at cutting position 96 cm
  • Height without cutting unit 78 cm
  • Max. opening 72 cm
  • Weight 285 kg
  • Propulsion of cutting cylinder (175 bar) 11 kN
  • Hydraulic tilt as standard
  • Bolt attached cutting blade Wear Plate 500
  • Min. hydraulic flow 40 l/min
  • Pressure 175 bars
  • No need for additional hydraulics.
  • Coupling into grapples hoses.
  • Detachable cutting unit.
  • 2 sequence valves.
51-EK_200_01